Current Category
Equipment

All of the equipment listed on this page is required for a complete submersible bore pump system.   We only supply the very best equipment and this is equipment that we currently use in situations where we install bore pumps ourselves.   This is exactly what we use and it works!   rod@borepumps.com.au 

	Steel Welded Bore Cap with 32mm Female BSP Thread 230mm overall diameter Our cast iron bore caps are manufactured in Australia.   The standard bore cap will fit all bores with a diameter of 150mm or less and this model has a 32mm female BSP thread in the centre together with a slot for cable access.		Price:	QTY:

	Steel Welded Bore Cap with 50mm Female BSP Thread 230mm overall diameter Our cast iron bore caps are manufactured in Australia.   The standard bore cap will fit all bores with a diameter of 150mm or less and this model has a 50mm female BSP thread in the centre together with a slot for cable access.		Price:	QTY:

	PVC Pump Shroud to fit 32mm PVC pump shrouds are installed over the body of the pump and motor so that the water flow past the motor is sufficient to achieve adequite cooling of the motor.   Easy to fit and definitely required if you are installing the submersible pump in a well or bore with a diameter of 150mm or greater.   This model fits the 32mm range.		Price:	QTY:

	PVC Pump Shroud to fit 40mm PVC pump shrouds are installed over the body of the pump and motor so that the water flow past the motor is sufficient to achieve adequite cooling of the motor.   Easy to fit and definitely required if you are installing the submersible pump in a well or bore with a diameter of 150mm or greater.   This model fits the 40mm range.		Price:	QTY:

	PVC Pump Shroud to fit 50mm PVC pump shrouds are installed over the body of the pump and motor so that the water flow past the motor is sufficient to achieve adequite cooling of the motor.   Easy to fit and definitely required if you are installing the submersible pump in a well or bore with a diameter of 150mm or greater.   This model fits the 50mm range.		Price:	QTY:

	316 Stainless Steel Safety Cable 3mm (Per Metre) Every submersible bore pump should "hang" on the metric poly pipe and not on the stainless steel safety cable or the electrical cable.   Stainless steel safety cable is required to provide insurance for those unfortunate times when the metric poly pipe breaks or loosens in the fittings.   This does not happen often but, if it does, you want to be able to retrieve your pump from down the hole so stainless steel safety cable is definitely required.		Price:	QTY:

	Grips/Clamps for 4mm Stainless Steel Safety Cable Both ends of the stainless steel safety cable must be secured using "Grips".   These are bolted clamps of the correct size and ours are all in 316 stainless steel to eliminate corrosion.   You will need 4 grips per submersible pump.		Price:	QTY:

	32mm Metric Poly Pipe x 32mm Male Brass Threaded Adaptor This is the only fitting that should be used to connect the metric poly pipe to the pump and the underside of the bore cap.   The male BSP brass thread will ensure that everything stays put exactly as it should.   The whole weight of your submersible bore pump should hang on the metric poly pipe and so, the threads on the fittings are absolutely critical and brass threads are perfect for the task.   This fitting fits 32mm metric poly pipe and all GS series pumps up to and including the 6GS series.		Price:	QTY:

	40mm Metric Poly Pipe x 32mm Male Brass Threaded Adaptor This is the only fitting that should be used to connect the metric poly pipe to the pump and the underside of the bore cap.   The male BSP brass thread will ensure that everything stays put exactly as it should.   The whole weight of your submersible bore pump should hang on the metric poly pipe and so, the threads on the fittings are absolutely critical and brass threads are perfect for the task.   This fitting fits 40mm metric poly pipe and all GS series pumps up to and including the 6GS series.		Price:	QTY:

	50mm Metric Poly Pipe x 32mm Male Brass Threaded Adaptor This is the only fitting that should be used to connect the metric poly pipe to the pump and the underside of the bore cap.   The male BSP brass thread will ensure that everything stays put exactly as it should.   The whole weight of your submersible bore pump should hang on the metric poly pipe and so, the threads on the fittings are absolutely critical and brass threads are perfect for the task.   This fitting fits 50mm metric poly pipe and all GS series pumps up to and including the 6GS series.		Price:	QTY:

	63mm Metric Poly Pipe x 32mm Male Brass Threaded Adaptor This is the only fitting that should be used to connect the metric poly pipe to the pump and the underside of the bore cap.   The male BSP brass thread will ensure that everything stays put exactly as it should.   The whole weight of your submersible bore pump should hang on the metric poly pipe and so, the threads on the fittings are absolutely critical and brass threads are perfect for the task.   This fitting fits 63mm metric poly pipe and all GS series pumps up to and including the 6GS series.		Price:	QTY:

	63mm Metric Poly Pipe x 50mm Male Brass Threaded Adaptor This is the only fitting that should be used to connect the metric poly pipe to the pump and the underside of the bore cap.   The male BSP brass thread will ensure that everything stays put exactly as it should.   The whole weight of your submersible bore pump should hang on the metric poly pipe and so, the threads on the fittings are absolutely critical and brass threads are perfect for the task.   This fitting fits 63mm metric poly pipe and all 8GS, 12GS and 16GS Series pumps.		Price:	QTY: